设为首页收藏本站
打印 上一主题 下一主题

HSGI WEESTACH看图说话

[复制链接]
查看: 783|回复: 7
跳转到指定楼层
1
发表于 2008-6-18 00:48 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
偶然的机会在威利物资那里看到一件weesatch,收之。。。
实际上c2出的wasatch应该是weesatch,区别在于wasatch有8个弹夹位而weesatch只有6个,官方说明如下:
The "Weesatch" is a smaller Plate Carrier version of the "Wasatch" . It's design was to carry multiple rifle magazine type from the M4 , AK , SR25 , and .308 mags . It was designed to carry the large SAPI plates or similiar size for both front and rear panels . **X-L sizes can be made to order** It has 4 full size internal pouches to carry up to 2 mags per pouch . The two outside pouches are smaller to fit either 1 mag or smaller gear . It uses velcroed closures to secure the magazines within and comes with 2 elastic type closures for items used such as radio's . This unit is contructed of 2 layers , outside layer is 1000 denier Cordura and inside is 420 /430 packcloth nylon . Sewn together with 138 bonded nylon threads . The Weesatch was designed to be worn over other with or without soft body armor . Please check your Plate instructions to see if your plates are stand alone . ( HSGI does not accept responsibility for miss-use of Ballistic materials . **This is only a plate carrier** ) The front panel alone measures 19" not counting the buckles . This version was designed for those whom have a smaller frame or wearing under garment body armor . Constructed of 1000 Denier Cordura nylon , sewn with 135/138 bonded nylon threads . Constructed and made totally with products from in the USA . Has HSGI Lifetime Warranty
“ weesatch ”是“wasatch”的缩小型防弹板携带背心 。它设计用来携带多个步枪弹夹,类型包括M4,AK , sr25 ,和0.308。它可以在前方和后方携带大型的SAPI板或类似的大小的防弹版前方和后方面板。 ** x-l大小可以定制** ,它有4个全尺寸的双联内部弹夹袋。两个外袋较小,可以装1个弹夹或小工具。这个附带魔术贴闭锁的玩意用来装弹夹,另外附带两个用来装手台之类的魔术贴。背心本体由2层组成,外层是1000D cordura,内层是420 / 430D尼龙。用138磅尼龙缝合。weesatch是需要穿在防弹衣外面的,请检查您的防弹板。 ( 如果使用了错误的防弹材料,hsgi不承担责任 **这只是一个防弹板携带背心** )的前面板,The front panel alone measures 19" not counting the buckles(这句啥意思?)。这个版本是专为那些体型较小的人,或身穿贴身的防弹衣的人设计的。1000D cordura尼龙制造,车缝与135/138磅尼龙线缝制。完全在美国设计和制造。HSGI终身保修
外观,不插入防弹板的话整体都软啪啪的。。。

胸口后面的性感小皮标

背板背面

原厂肩垫,背后有软橡胶防止滑动,零售18usd。。。

安装肩垫以后的效果

个人感觉最大的优势在于可以放双联的G36弹夹进去

满载状态

不插防弹版的话,可以把前胸的部分收入背板,变成提包

嫌热不想要背板可以另买HSGI的x背带


[ 本帖最后由 chinamabin 于 2008-6-18 20:14 编辑 ]
分享到:  微信微信
收藏收藏 分享分享
2
发表于 2008-6-18 11:08 | 只看该作者
背带上的D环是用来固定水囊吸管的?
回复 支持 反对

使用道具 举报

3
 楼主| 发表于 2008-6-18 21:53 | 只看该作者
是地。。。不过从来不背水袋。。。
回复 支持 反对

使用道具 举报

4
发表于 2008-6-18 22:20 | 只看该作者
额,comtac ,P少为了这耳机可是劳神了 挖卡卡
回复 支持 反对

使用道具 举报

5
发表于 2008-6-18 22:45 | 只看该作者

满塞!

教主大能!终于开始烧原品装具了!
回复 支持 反对

使用道具 举报

6
发表于 2008-6-19 16:58 | 只看该作者
整点原厂包具别上吧
回复 支持 反对

使用道具 举报

7
发表于 2008-6-19 17:01 | 只看该作者
安这个配置装吧

回复 支持 反对

使用道具 举报

8
发表于 2008-6-19 17:27 | 只看该作者
The front panel alone measures 19" not counting the buckles

字面意思大概是前面板不算搭扣的话是19英寸吧?  记得''是个长度单位,具体是啥不记得了。
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

关于我们

作战两千(COMBAT2000)成立于新世纪2000年,COMBAT2000品牌秉承精益求精的态度,以诚信为宗旨,力求获得广大用户的拥戴及所有合作伙伴以及供应商的支持。

联系我们

  • 地址: 广州市萝岗区科学大道起云路1号视联电子科技园A栋711室
  • 电话: (am10:00-pm17:00) 400 602 2000
  • 传真:+86-20-8231-1913
  • Email: sales@combat2000.com

分享到

新加入会员

© 2001-2013 COMBAT2000论坛.粤ICP备14001821号  Powered byDiscuz! X3.2 Licensed  
快速回复 返回顶部 返回列表